Dryer Type And New Condition Moringa Leaf Drying Machine
Product Description
KINKAI Moringa Leaf Drying Machine Introduction
KINKAI heat pump dryer is a device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator.
Model: JK03RD, JK06RD, JK10RD
Power Supply: 220V/1PH/50HZ or 380V/3PH/50HZ
Type: 75% air source + 25% electric power
Max. Temp: 75C
Working Temp: -10~45C
Functions: Heating / Cooling / Dehumidify
Dryer Type: Batch Type
Advantages
KINKAI Moringa Drying Machine Feartures
1.New designed energy saving dryer with two times waste heat recovery.
2.Using our patented technology: circulating heating & dehumidification, broaden the application of a dehumidifier in industrial drying
3.Adopt PLC + touch screen controllers, operation easily and more accurate
4.Adopt programmable control mode, can be set different drying curve, satisfy different kinds material drying methods
5.Multi-functions: drying / cooling / dehumidify
6.Low temperature drying method(15-50°C/60°C/75°C),similar nature drying.
7.During drying, the material does not craze, does not distortions, non-discoloring, never degenerate, non-oxidize, drying completely, with good rehydration, keep nutrient content;
8.Stable operation without being influenced by weather
9.Economical: Heat pump dryer running cost just as 40% of oil dryer, 50% of coal burning boiler, 30% of electric boiler.
10.Can supply dryer + drying chamber
Technology
KINKAI Moringa Drying Machine Technical and Parameters
Model | JK03RD | JK06RD | JK10RD | |
Suitable for drying chamber | m3 | 10~20 | 20~30 | 30~40 |
Power supply | V/PH/HZ | 380/3/50 or 220/1PH/50 | 380/3/50 | 380/3/50 |
Power input | KW | 2.8 | 5.8 | 10.8 |
Running current | A | 8/17 | 12.6 | 22.5 |
Auxiliary electric heater(option) | KW | 9 | 9 | 9 |
Heating capacity | KW | 12 | 26 | 35 |
Cooling capacity | KW | 7.5 | 20 | 25 |
Dehumidification amount | L/H | 8 | 20 | 40 |
Max. hot air Temperature | ℃ | 75 | 75 | 75 |
Working ambient temperature | ℃ | -10~45 | -10~45 | -10~45 |
Refrigerant | Kg | Mixture type/2.5 | Mixture type/4.3 | Mixture type/8.0 |
Compressor | Type | Scroll | Scroll | Scroll |
Brand | Copeland/Danfoss | Copeland/Danfoss | Copeland/Danfoss | |
Quantity | 1 | 1 | 2 | |
Noise | dB(A) | 60 | 65 | 70 |
Fan motor for drying | Power input/unit | 250W/unit | 250W/unit | 250W/unit |
Wind volume | m3/H | m3/H | 2500m3/H/unit | |
Recommend qty | 8 | 8 | 16units | |
Heat regenerator size | mm | 500*350*350 | 500*500*580 | 550*600*680 |
Fan motor for heat regenerator (dehumidify) | Power input | 200W | 370W | 550W |
Wind volume | 2000m3/H | 2000m3/H | 3500m3/H | |
Size(mm) | 450*330*380 | 470*320*470 | 580*320*580 | |
Wind valve | Power input | 6W | 6W | 6W |
OPEN | Exchange fresh air | Exchange fresh air | Exchange fresh air | |
CLOSE | Drying | Drying | Drying | |
Size(mm) | 480*320*120 | 630*560*120 | 720*640*125 | |
Fan motor for evaporator (2 units) | Power input | 250W/unit | 780W/unit | 780W/unit |
Wind volume | 4600m3/H | 10500m3/H | 2*10500m3/H | |
Rotate speed | 1350RPM | 1350R/Min | 1350R/Min | |
Hot air outlet | mm | 600*1100 | 650*1100 | 860*1485 |
Hot air return inlet | mm | 690*1100 | 750*1100 | 1050*1450 |
Dimension(L*W*H) | mm | 1650*960*1280 | 1720*1160*1280 | 2100*1460*1590 |
Net weight | Kg | 210 | 385 | 480 |
Gross weight | Kg | 240 | 420 | 540 |
Product Uses
KINKAI Heat Pump Dryer appllication
Buying Guides
Recommend Dryer +Drying sizes.
1.Single dryer+drying chamber | ||||
Product name | Model | Size | Quantity | Remarks |
Drying machine | JK10RD | 35.0KW | 1 | Stainless steel body for option |
Drying chamber | S100mm(thickness:100mm) | 6000x2800x2200mm | 1 | |
Drying chamber material | Polyurethane(Two sides:steel) | Steel sheet(thickness:0.326mm) | / | |
Door | S100mm(thickness:100mm) | 1000x1800mm | 1 | |
Partition sheet | Thickness:25mm | 4300x2000mm | 1 | |
Fan motors | 3# | 250W/unit | 8 | |
Suitable about 1000KG/batch | ||||
2. Double dryers+drying chamber | ||||
Product name | Model | Size | Quantity | Remarks |
Drying machine | JK10RD | 35.0KW | 2 | Stainless steel body for option |
Drying chamber | S100mm(thickness:100mm) | 10000x2800x2200mm | 1 | |
Drying chamber material | Polyurethane(Two sides:steel) | Steel sheet(thickness:0.326mm) | / | |
Door | S100mm(thickness:100mm) | 1000x1800mm | 4 | |
Partition sheet | Thickness:25mm | 8300x2000mm | 1 | |
Fan motors | 3# | 250W/unit | 16 | |
Suitable about 2000KG/batch |
Packaging & Shipping
Packaging Details
Our Services
1) OEM service
2) Produce heat pump according to customer's special demands.
3) Supply spare parts according to order quantity.
4)Technical support for your installation, operation and maintenance.
5) One year’s warranty, and you can pay for extended warranty.
6)Spare parts and technical support at most economic prices after the warranty