KINKAI HEAT PUMP DRYER MACHINE
A device that transfers heat from a colder area (ambient temperature) to a hotter area (drying chamber) by using mechanical energy, as in a refrigerator.
Some Parts of the Dryer Machine
Dehydrator Use for :
Dry vegetables like Radish, lettuce, pumpkin, carrots, spinach, cassava etc
Dry fruits like Apple, lemon, mango slices, dried longan, dried longan etc
Dry meat: fish, Sausage, jery beef, duck, ham ect
Others it can dry noodle, wooden, stick incense, herbs, floers ect.
Dehydrator Functions:
Heating drying
Cooling drying
Heating +dehumidify drying
Comparison
| Various Drying energy Economy Comparison Table | |||||||
| Heating Mode | KINKAI Latest Heat Pump Dryer | Electric Heating | Coal Boller | Oil Fired Boiler | Gas Boller | Biomass Stove | Regular Heat Pump Dryer |
| Remove 1kg of water required heat energy | According to information provided by the relevant authority of the document, the average 1kg of water to remove heat energy required for 1.35 kw/kg, namely 4860kj/kg | ||||||
| Fuel type | Electric | Electric | Coal | Diesel | Gas | Biomass | Electric |
| Heat Value | 3600kj/kg | 3600kj/kg | 23027kj/kg | 33494kj/kg | 36006kj/kg | 17459kj/kg | 3600kj/kg |
| Thermal efficiency | 400% | 95% | 30% | 85% | 85% | 90% | 350% |
| Effective thermal value | 14400kj/kg | 3420kj/kg | 6906kj/kg | 28469kj/kg | 30605kj/kg | 15713kj/kg | 12600kj/kg |
| Fuel Price | 0.1$/kwh | 0.1$/kwh | 0.1$/kg | 1.2$/L | 0.8$/m3 | 0.2$/kg | 0.1$/kwh |
| Fuel consumption | 0.337kwh | 1.42kwh | 0.7kg | 0.17L | 0.159m3 | 0.375kg | 0.386kwh |
| Fuel consumption($) | 0.33 | 1.42 | 0.7 | 1.26 | 0.795 | 0.37 | 0.39 |
Labor management, warehousing costs | Low | High | Higher | High | High | Low | Low |
| Safter performance | Safe | Unsafe | Unsafe | Unsafe | Unsafe | Safe | Safe |
| Environmental pollution | None | Very serious | More serious | More serious | Light pollution | None | None |
| Life of equipment | 10-15 years | 5-8 years | 6-9 years | 6-9 years | 6-9 years | 8-12 years | 10-15 years |
energy saving 75% as well as good quality ensuring
Recomand model
| Recommend Dryer+Drying Chamber Size | |||
| Item | Description | Product Capacity | Drying Chamber size |
| 1 | One unit JK03RD dryer + drying chamber | 300Kg / batch | 4000*2000*2200mm |
| 2 | One unit JK06RD dryer + drying chamber | 600Kg / batch | 6000*2800*2200mm |
| 3 | One unit JK10RD dryer + drying chamber | 1000Kg / batch | 6000*3000*2200mm |
| 4 | Two units JK03RD dryers + drying chamber | 1200Kg / batch | 7000*2200*2200mm |
| 5 | Two units JK06RD dryers + drying chamber | 1500Kg / batch | 10000*2800*2200mm |
| 6 | Two units JK10RD dryers + drying chamber | 2500Kg / batch | 10000*3000*2200mm |
Warm prompt: We can make any drying chamber sizes as your require
Attentions: The early temperature shall not be too high since the high temperature has a negative impact on drying quality. | Fish contain a lot of water, but also fat and grease, so it is very hard to remove water from them. Therefore, control over the speed of dehydration is of importance. | Color of cured fish is another important factor. | Color of cured fish is another important factor. |
How to dry incense with KINKAI dryer
Phase I: Set the temperature to 45°C and the humanity to 80% RH. Dry it for 5-6 hours. | Phase II: Set the temperature to 50°C and the humanity to 60% RH. Dry it for 3 hours. | Phase III: Set the temperature to 55°C and the humanity to 40% RH. Dry it for about 1 hour, and then you’ll get dried incense. |
Our dryer features1. Most of the air is circulated in the drying chamber. The heat efficiency is high and energy is saved.2. The heat dryer can control the drying chamber temperature between 10-75C.
3. The heating source use 25% electricity and 75% air source.
4. Running stable, operating easily.
5. Low noise, balanced operation, automatically temperature control, easy installation and maintenance.
6. The application is wide. Can be used for drying various materials and is versatile drying equipment.
7. The baking plate dimensions custom-made as customer request.
Packaging & Shipping
1.For heat pump dryer parts with export standred plywood case
2.For whole set dryer machine with 20GP,40GP,40HQ container
Our Services
A. Payment service
1, T/T
2, L/C (for container order only)
3, Western Union, (for sample order & parts)
B. Technical service
1, We calculate the capacity and recommend the best models.
2, We supply you the professional refrigeration technical support and electronic technical support for your installation, debugging and operation.
3, We supply the spare parts and technical support in & after the warranty time.
4, We supply the training course to your workers at our factory if you need.
C. After-sales service
1, Technical support for your installation, operation and maintenance.
2, Two year’s warranty, and you can pay for extended warranty.
3, Spare parts and technical support at most economic prices after the warranty.
Any questions, Please feel free to contact. I am here waiting for you.
